Convertor Cable Control for Red Dot R-5045 unit 72R9000

A cable convertor control converts the rotary motion of a knob to a linear motion, to push or pull a control cable.

When installing a new convertor or control cable it is necessary to adjust the cable for proper operation of the controlled device. For a heater valve, it is best to adjust the cable to ensure the heater water control valve has 100% shut off, verified at the valve. Heater output will easily override air conditioner cooling capacity. Therefore, a valve that does not have 100% shut off will add heat to the system to some degree. To adjust the control, manually put the valve to 100% closed. Manually turn the converter to the 100% off position. Install the cable loosely in the clamps, making sure the valve remains 100% off. It is acceptable for the convertor to creep away from the full off position but the valve must remain 100% closed. Tighten the cable clamps on both ends of the cable.

• Part Number: 72R9000
• Type: Convertor cable control
• Action: Push-Pull
• Special attribute: Use with Red Dot R-5045 unit and Universal
• Special Attribute: Use with 71R4020 Knob

Interchange Numbers:

• 1911505761
• 232-8706
• 2529
• 4379-RD579990
• 4379-RD579990P
• 625-4515
• 723-7401
• ABP N83 327830
• HP27401
• RD-5-7999-0P
• RDHRD579990P
• RDT72R9000